Technical specifications
FIPRO AK 954 is a liquid product based on inhibited organic acid that is used for cleaning circuits soiled mainly by deposits containing iron and manganese hydroxides.
Chemical-physical properties
Parametro | Valore |
|---|---|
Appearance | Straw-yellow liquid |
PH | 4.3 ÷ 4.7 |
Solubility in Water | Complete |
Usage and Applications
FIPRO AK 954 also acts against metal oxides and encrustations from hardness salts, without any risk of corrosion of metal surfaces.
The product has a strong buffering capacity, thanks to which it can be used effectively under the following dosage and application conditions, without further pH adjustment.
FIPRO AK 954 is a product for industrial use only.
Applicazione | Concentrazione |
|---|
Power supply
FIPRO AK 954 should be used diluted to a concentration of 5 to 20 litres/m3, depending on the degree of fouling of the system, and should be added when the system is stopped.
FIPRO AK 954 can be used at room temperature but, for greater effectiveness, it is preferable to heat the solution to 40 - 45°C, ensuring good recirculation. If the circuit is very dirty, the washing operation should be repeated. The duration of flushing varies according to the concentration of the solution, the temperature at which it is used and the state of the circuit. It is recommended, in any case, to contact FIPROKIM Technical Service for special operational requirements.
Storage
The product is supplied in different packaging and should be stored in the original packaging in dry and ventilated places. For storage, use acid-resistant materials, preferably plastic (PVC, PE).
Applications
Pipe circuits, heat exchangers, evaporators, boilers
Water conditioning
Prevention of inorganic and organic fouling and sediment in open and closed circuits
Prevention and stopping of localised corrosive phenomena in circuits and pipes
Regulation of salinity and hardness
Bacterial flora reduction and prevention
Hygienisation
Circuit cleaning and maintenance
