Technical specifications
FIPRO AK 955 is a product that mainly has an anti-corrosive action to prevent the formation of "red water" in the water mains and, in addition, a good anti-limescale action.
Usage and Applications
FIPRO AK 955 is suitable for drinking water with low total hardness (< to 140 ppm CaCO3) and with free carbon dioxide present.
FIPRO AK 955 is a liquid product based on a particular mixture of alkaline silicates and phosphates prepared with raw materials that comply with the UNI-EN standards for chemical products that can be used for conditioning water intended for human consumption.
Parametro | Valore |
---|
Power supply
The dosage of FIPRO AK 955 ranges from 60 to 120 g/m3 of water. Before starting treatment, it is recommended to check local drinking water regulations. Silica and phosphate contribution from FIPRO AK 955:
1 mg/l FIPRO AK 955 gives: 0.15 mg/l SiO2
e < at 0.02 mg/l P2O5
The concentration of the product in the water is determined by a colorimetric analytical method available from Fiprokim.
The product must be dosed continuously using suitable dosing systems, depending on the water flow rate.
Applicazione | Concentrazione |
---|
Storage
The product is available in different packaging.
Store unopened original packaging in a dry and ventilated place.
Avoid storage temperatures below + 5°C and not above 45°C.
Mild differences in product appearance do not affect product efficiency and operational performance.
Applications
Pipe circuits, heat exchangers, evaporators, boilers
Water conditioning
Prevention of inorganic and organic fouling and sediment in open and closed circuits
Prevention and stopping of localised corrosive phenomena in circuits and pipes
Regulation of salinity and hardness
Bacterial flora reduction and prevention
Hygienisation
Circuit cleaning and maintenance