Technical characteristics
WATERFIP C 820 is a neutral product developed for the coagulation of paints in water-curtain spray booths. It is suitable for treating water- and solvent-based paints, even those that are difficult to denature (polyesters, alkyds, acrylics, melamines, high-solids, UV-curing).
WATERFIP C 820 offers countless advantages: it has no hazard labeling, keeps the recirculating water clear and odorless, and forms non-sticky, non-adherent sludge that can be easily and quickly removed from the systems.
Use and Applications
WATERFIP C 820 is used as is, at an initial concentration of 0.8 – 2.5 kg of product per cubic meter of water to be treated.
Subsequent additions are made based on the paint overspray, normally at a rate of 4% - 7% of product relative to the amount of paint sprayed, using automatic dosing systems.
The correct dosage of WATERFIP C 820 is determined during the plant start-up phase.
In the case of manual dosing, to ensure good consistency in paint denaturation, product additions should be made at short and regular intervals.
Dosing should, however, be carried out in an area of high turbulence (e.g., near the recirculation pump) because, thanks to this measure, good mixing and a clear improvement in coagulation and flotation will be achieved.
Parametro | Valore |
|---|---|
Storage
Avoid impacts and improper handling of packaging that may cause product spillage. Protect from freezing, store away from heat sources, keep containers tightly closed.
Applicazione | Concentrazione |
|---|---|
Are you interested?
Write to us and we will reply as soon as possible!
