Technical specifications
The WATERFIP F 215 is a primary coagulant based on a mixture of polymeric cationic agents and iron-based inorganic salts, the application of which allows for the formation of large, easily settleable flocs. It is particularly suitable for the destabilization of organo-metallic coagulates such as oily emulsions, dispersions of dyes and/or enamels, and wastewater containing phosphoric residues.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Appearance | Amber liquid |
Density | 1.42 g/ml |
pH | <1 |
Use and Applications
WATERFIP F 215 exerts its action through the synergy of its components, which tend to destabilize the coagulated pollutants present.
The effect is immediate, although under certain conditions, a longer reaction time may be required. The optimal working pH is between 4 and 6.
Following the action of the product, it is possible to proceed to the neutralization phase and then to the dosing of organic polyelectrolytes to complete the clarification-flocculation process. The use of WATERFIP F 215, by promoting the complete decharacterization of pollutant loads, allows for an easily dewaterable sludge.
WATERFIP F 215 can be fed as is or pre-mixed in any ratio with water.
The dosage of WATERFIP F 215 depends on numerous factors, such as the type/quantity of pollutants present, the existing plant, etc., and must be established for each specific application through a Jar-Test study. However, it is important to carry out this dosing, if possible, at a point of adequate turbulence.
Applicazione | Concentrazione |
|---|---|
Storage
All materials in contact with the product must be acid-resistant.
WATERFIP F 215 must be stored in its original packaging in a dry and ventilated place.
The parameters specified in the operating instructions are to be considered general and not binding for the correct management of the treatment. The Technical Service will, on a case-by-case basis, define the optimal management and control parameters during the commissioning of the plant, and if quality requirements dictate, modify these parameters, taking care to update their values.
Are you interested?
Write to us and we will reply as soon as possible!
