Technical specifications
FIPRO AK 01 is a formulation for corrosion control in cooling and recirculation supports.
FIPRO AK 01, in addition to ensuring the highest degree of protection for ferrous and non-ferrous metals, prevents the formation of deposits and scale if low-hardness make-up water (below 5° F) is used, while simultaneously inhibiting the growth of algae and microorganisms.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Appearance | Colorless liquid |
Odor | Slightly aromatic |
pH | ~11.5 |
Solubility in Water | Complete |
Foam Formation | None |
Use and Applications
FIPRO AK 01 is used in all industries where cooling systems supplied with softened or demineralized water are present.
FIPRO AK 01 is normally used as is.
For the treatment of softened and demineralized water, the recommended dosage is 50 - 100 ppm on the make-up water.
If a greater biocidal effect is desired, it can be used at higher concentrations.
Applicazione | Concentrazione |
|---|---|
Bath control
Use the appropriate test kit.
Storage
Avoid impacts and improper handling of packaging, which may cause product leakage. Protect from frost (freezing point –5°C), store away from heat sources, and keep containers tightly closed in areas protected from moisture.
Applications
Piping systems, heat exchangers, evaporators, boilers
Water conditioning
Prevention of scaling and inorganic and organic deposits in open and closed circuits
Prevention and arrest of localized corrosion phenomena in circuits and piping
Regulation of salinity and hardness
Reduction of bacterial flora and prevention,
Sanitization
Cleaning and maintenance of circuits
Are you interested?
Write to us and we will reply as soon as possible!
