Technical specifications
FIPRO AK 03 is an alkaline liquid formulation based on corrosion inhibitors, film-forming agents, sequestering agents, and dispersants. Through its specific oxidation inhibitors, it prevents corrosion on metal surfaces and yellow alloys. The dispersing effect prevents scaling due to water hardness, making it suitable for use in recirculating and make-up water.
It is also compatible with the most common commercially available antifreeze solutions and, at normal use concentrations, has no negative effects on the environment. FIPRO AK 03 is neither volatile nor flammable, and does not contain heavy metals with toxic effects.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Solubility in Water | Complete |
Foam formation | None |
Use and Applications
FIPRO AK 03 is suitable for closed and sealed cooling circuits containing ferrous materials and copper alloys. It possesses strong anti-scaling and dispersing properties for circuits using hard water as make-up.
FIPRO AK 03 should be dosed with an automatic system proportional to the make-up; the product must be introduced at a point where there is good turbulence. The dosage depends on several factors; it is recommended to maintain the concentrations set during plant commissioning:
water with hardness above 10 °F: 1,500 – 3.000 g/m3
soft water up to 10 °F 1,000 – 1.500 g/m3
demineralized water 500 - 1.000 g/m3
Average recommended dosage 2000 ppm.
Any turbidity of the product does not affect its efficacy. Since FIPRO AK 03 is alkaline, all materials in contact must be alkali-resistant.
Applicazione | Concentrazione |
|---|---|
Bath control
The amount of FIPRO AK 03 present can be determined spectrophotometrically or with a specific test kit.
Storage
Avoid impacts and improper handling of packaging that may cause product leakage. Protect from freezing, store away from heat sources, and keep containers tightly closed in areas protected from moisture.
Sei interessato?
Scrivici e ti risponderemo nel più breve tempo possibile!
