Technical specifications
FIPRO SG 564 is a fully volatile solvent with a barely perceptible odor that does not develop over time, even when exposed to heat and light, unlike other conventional hydrocarbon solvents.
This characteristic makes it ideal for applications where a pleasant odor is essential, such as household products, cleaning of electronic components and metal surfaces, barbecue fluid, cosmetics, graphics, and the production of odorless paints, but also in the textile, metalworking, automotive industries in general, and the transport sector. It has low solvency power towards most resins, plastics, and rubbers, allowing safe use even in the presence of various types of gaskets.
However, given the wide variety of synthetic materials available on the market, it is advisable to carry out a preliminary compatibility test by immersing a material sample in FIPRO SG 564 for a few hours.
In the mechanical sector, it is used for degreasing metal surfaces, either inter-operational or prior to painting or other treatments. It has been designed for all cleaning operations, by wiping or immersion, where the use of pure chlorinated solvents is not recommended.
FIPRO SG 564 removes contaminants consisting of oils, dust, grease, etc.
Use and Applications
Immersion use:
Simply immerse the parts to be cleaned in the product, preferably with gentle agitation, especially in the presence of solid particles and/or adhering chips.
The operating temperature can range from ambient to 30-32 °C. However, it is recommended not to exceed the flash point.
The drying speed of the parts depends on the operating temperature: when working in cold environments, it is advisable to let the parts drip thoroughly after removal, and leave them exposed in a ventilated environment for at least twenty minutes to allow complete drying.
The product can - very advantageously - be used in the presence of ultrasound as a degreasing accelerator. This is particularly useful if the surfaces are soiled with adhering solid residues.
Brush/cloth application:
The product is particularly suitable for cloth or brush application. In this case, the mechanical rubbing action, combined with the softening and solvent power of the product and its penetration capacity (even where tolerances are extremely tight), allows for perfect and rapid cleaning of the treated parts.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Appearance | Colorless liquid |
Odor | Characteristic |
Specific gravity at 20 °C | 0,765 Kg/l |
Solubility in Water | Immiscible |
Tanks and Storage
Metal tanks are recommended: for example, iron or steel are perfectly suitable. Fittings can be made of brass.
For system materials in contact with the product, the use of rubbers and paints is not recommended as, in the long run, they could be damaged or swollen.
Any heating elements can be made of stainless steel (or, with less guarantee of durability over time, copper). Regarding heating, absolutely avoid the use of immersed electrical heating elements, due to the risk of overheating and malfunctions that could lead to fire. Use heating fluids (e.g., hot water) and install an additional safety thermostat set to a temperature below 35 °C.
Applicazione | Concentrazione |
|---|---|
Key Features
Multi-material degreasers
Pre- and post-machining treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, produced, and controlled in-house
Applications
Removal of neat and emulsifiable oils, greases, and machining pastes
Dephosphating
Removal of polishing pastes from parts and small components
Removal of in-process residues, protective coatings, polymeric films and silicones
Etching, pre-painting, and pre-conversion treatments
Cleaning of plastics and glass
In-process or final product cleaning
Sei interessato?
Scrivici e ti risponderemo nel più breve tempo possibile!
