Technical specifications
FIPRO SG 565 is a fully synthetic, nitrite-free liquid degreasing product with anti-rust properties on ferrous materials. The main application of this product is in inter-operational cleaning, in spray washers, across all mechanical and automotive industries, as it excellently replaces traditional cleaning with products based on emulsifiable oils or powder products containing nitrites.
The table below briefly summarizes the characteristics of the product in comparison to traditional products.
Use and Applications
In single-stage washing machines, it is used at a concentration of 1.5 - 2.5% with ambient temperature that can be raised up to 50 - 60°C for heavy-duty cleaning requirements.
In multi-stage washing machines, it will be sufficient to add the product in the last stage at a rate of 0.5 - 1.0% to ensure rust protection.
For use as an immersion protective, concentrations of 3.0 - 5.0% are used at temperatures from ambient to 50 °C.
Chemical-physical properties
Parametro | Valore |
|---|---|
Appearance | Amber liquid |
pH | 10 |
Specific gravity | 1.050 - 1.060 Kg/l |
Nitrites | Absent |
Boron and Derivatives | Absent |
Mineral Oils | Absent |
Foam Formation | Low |
Behavior in hard water | No negative influence |
Bath control
Take 10 ml of the bath to be analyzed and transfer them into the flask
Add 5-6 drops of Methyl Orange indicator, the solution will turn YELLOW.
Add 100 ml of distilled water
Titrate with N/10 Hydrochloric Acid (HCl) until a persistent RED coloration of the solution is obtained.
The ml of N/10 Hydrochloric Acid consumed in the titration indicate the total alkalinity of the FIPRO SG 565 bath.
Applicazione | Concentrazione |
|---|---|
Power supply
To obtain the concentration in g/l, multiply the value obtained by the fixed factor of 3.7.
Key Features
Multi-material Degreasers
Pre- and Post-processing Treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, manufactured, and tested in-house
Applications
Removal of neat and emulsifiable oils, greases, and metalworking pastes
Dephosphating
Removal of polishing compounds from parts and small components
Removal of inter-operational residues, protectives, polymeric films and silicones
Etching, pre-painting, and pre-conversion treatments
Cleaning of plastics and glass
Inter-operational or final cleaning of the product
Are you interested?
Write to us and we will reply as soon as possible!
