Technical specifications
FIPRO DET 662 is a safe-to-use cleaner, the product is non-toxic and does not develop harmful gases or fumes.
Ideal for cleaning transport vehicles, degreasing machinery and engines, cleaning plants, tanks, walls and floors.
Chemical-physical properties
Parametro | Valore |
|---|---|
Appearance | Straw-yellow liquid |
Smell | Characteristic |
PH | ~12 |
Specific weight | 1,055 kg/l |
Usage and Applications
Transport vehicle maintenance
FIPRO DET 662 is used for the maintenance of vehicles such as: trucks, buses, railway carriages, tankers or any other means of transport. It can be applied by brushing or spraying.
FIPRO DET 662 cleans exterior surfaces quickly and easily without affecting the normal brilliance of paint or decal lettering. It is excellent for cleaning plastic interiors. Applied by high-pressure spraying or with steam it is effective in removing road dirt, oil, grease, traces of burnt-out fuel from trucks or car bodies.
.Workshop maintenance
FIPRO DET 662 used pure or diluted in water is also used for immersion degreasing of engine parts; applied with cloths, it degreases and cleans heavy machinery, trolleys, runners, floors, etc.
Cleaning of large plants, rolling machinery, trucks, buses, etc.
Apply FIPRO DET 662 diluted with water up to 50% depending on the type and amount of dirt to be removed. Leave the solution in contact with the dirt for a few minutes. If necessary, apply a second time, then rinse with a strong jet of water and dry.
.If possible, apply with high pressure pumps.
When working outdoors, it is recommended to work in the shade and not in full sun.
Cleaning with steam or high pressure pumps
Prepare 20% solution in the detergent tray.
At the outlet you will have the correct use concentration (0.2 - 2%).
FIPRO DET 662 is also ideal for use with compressed air pumps.
Cleaning walls, floors and painted surfaces
Apply FIPRO DET 662 diluted with water (1 part in 20 parts water) or more concentrated as required. Scrub with a brush and then rinse and dry.
It is ideal for cleaning tenacious dirt without damaging underlying surfaces.
Immersion Pots
FIPRO DET 662 can replace hazardous solvents when degreasing parts soiled with oils, greases or cleaning pastes. For this purpose it should be used cold, pure or diluted 50% with water. Leave the parts immersed for as long as necessary (overnight if necessary), then rinse with a strong jet of cold water.
It is also regularly used in repair shops as a substitute for solvent-based descaling agents.
Applicazione | Concentrazione |
|---|
Highlights
Does not affect treated surfaces
. Suitable for plastics
Removes oils, grease and deposits
Applications
For transport vehicles and transmission organs
. Interior industrial machinery maintenance (forklifts, trolleys)
For industrial surfaces subject to frequent and heavy pollution
. Cleaning of tanks and installations
