Technical specifications
FIPRO DET 663 is a liquid product with a high content of active degreasing substances and water-soluble solvents. It has been developed for the manual or mechanical cleaning of industrial floors.
FIPRO DET 663 is also effective on highly soiled floors and is suitable for removing black rubber residues.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Appearance | Straw yellow liquid |
Odor | Characteristic |
pH | approx. 13 |
Specific gravity | 1.10 Kg/l |
Foam Formation | Low |
Use and Applications
FIPRO DET 663 is used in scrubber-dryers at concentrations of 1 – 3% for "normal" dirt or at higher concentrations in the case of particularly stubborn dirt.
For manual cleaning, proceed as follows: apply a 2 – 3% solution of FIPRO DET 663 onto the floor to be washed, allow to act for 3 - 5 minutes, scrubbing the most difficult spots, and then rinse.
Applicazione | Concentrazione |
|---|---|
Storage
Avoid impacts and improper handling of packaging that may cause product leakage. Protect from frost, store away from heat sources, and keep containers tightly closed.
Key Highlights
Does not attack treated surfaces
Suitable for plastics
Removes oils, greases and deposits
Applications
Maintenance of internal industrial machinery (forklifts, trolleys)
For industrial surfaces subject to frequent and heavy soiling
Cleaning of tanks and systems
Sei interessato?
Scrivici e ti risponderemo nel più breve tempo possibile!
