Technical specifications
FIPROPLUS 701 is an additive based on cosolvents and non-ionic surfactants with a restrained foam. It is used to increase the degreasing power of alkaline or acid detergent solutions. It has a very high wetting and solvent power against hard-to-remove pollutants and polymerised oils.
.FIPROPLUS 701 contains elements within it that destabilise the emulsified oil, i.e. allow the separation of the oily phase from the bath. Thus, once the workpiece has been degreased, the disemulsified oil is separated (usually brought to the surface) and does not interfere with subsequent washing. A separate oil removal system is recommended. The type of surfactant used allows use even at low temperatures.
.
Chemical-physical properties
Parametro | Valore |
---|---|
Appearance | Clear liquid |
Smell | Slight |
Density | ~1 |
PH | ~8.7 |
Usage and Applications
It is used in spray systems, with pressures below 5 bar. Usually dosed at 5-15% on the base product. Suitable for phosphodegreasing, phosphodecapping, pickling, weak and strong alkaline degreasing. It is dosed every time the base product is dosed, depending on the percentage agreed with Fiprokim technical service.
Applicazione | Concentrazione |
---|
Power supply
It is based on the visual verification of the maintenance of a continuous water-break film on treated parts. If the effect of the water film is discontinuous (water-break), the use of FIPROPLUS 701 must be reinforced up to a maximum of 5 g/l. No analytical control of the product is foreseen.
Storage
Stacking in covered areas. Recommended use: 12 months delivery date.
Highlights
Increased degreasing power
. High wetting and solvent power
Allows separation of the oily phase from the bath
Applications
Degreasing baths
Phosphate and phosphate degreasing lines
Ultrasonic plants and tanks