Technical specifications
FIPROSTEEL 777 is a product formulated for the cleaning and final maintenance of stainless steel and aluminum with bright or satin finishes.
With its good degreasing power, it cleans all contamination caused by surface handling, leaving a protective film on the surface itself.
If the issue recurs due to subsequent handling, simply wipe the surface with a soft cloth to remove them.
Physico-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Under pressure |
Odor | Characteristic |
Solubility in Water | Immiscible |
Use & Applications
Since this is a spray product, always make sure to shake the can well before use to achieve perfect homogenization.
Spray from a distance of approx. 20-30 cm from the workpiece to be treated, then after a few minutes wipe with a dry cloth.
A light protective film forms on the treated surface; even if it is handled and some smudging occurs, simply wiping it again with a dry cloth is enough to restore it to perfect condition.
Applicazione | Concentrazione |
|---|---|
Warnings
Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn after use. Do not inhale vapors directly. Do not smoke. Use only in well-ventilated areas. Do not spray on flames or incandescent materials. Avoid spraying in eyes. Avoid excessive use. Keep out of reach of children and away from any source of ignition.
Key Features
Final cleaning.
Applications
Degreasing and final cleaning
Brightening of stainless steel and aluminum
Stainless steel and aluminum processing sector
Are you interested?
Write to us and we will reply as soon as possible!
