Technical specifications
METALFIP 335 is an acidic liquid product, nitric acid free, to be used as it is and, therefore, able to prevent any possible dilution error. Its high solubility in water makes it very easy to rinse after workpiece treatment.
METALFIP 335, within the recommended contact times, does not attack metals as it contains suitable inhibitors.
Usage and Applications
Concentration: product as is
. Temperature: 20° C
Contact time: a few seconds to a few minutes
In order to obtain the best polishing results and avoid deterioration of the bath, it is advisable to precede:
1) Decontamination to remove oils and grease
2) Cold rinse, or better, with lukewarm water
3) Drying
This last operation is recommended in order to avoid the introduction of water into the METALFIP 335 bath, which, in any case, can only be taken up to a maximum of 5-10% of the total volume.
METALFIP 335 can be used in PVC lined baths.
Parametro | Valore |
|---|
Precautions
METALFIP 335 is a strongly acidic product; it is therefore advisable to take all necessary precautions when handling it (goggles, gloves). In case of contact with skin, wash thoroughly with water.
.Applicazione | Concentrazione |
|---|
Highlights
Nitric acid-free
Excellent bath longevity
Detergent and brightening action
Low foaming
Applications
Cleaning and degreasing lines
. Cleaning and degreasing equipment
Preconversion treatments (pre galvanic)
