Technical specifications
FIPRO DEFOAM C is a NON-SILICONE defoamer based on fatty acid ester/polyglycol oil, applicable in all processes where compact foam is formed.
The most common uses and applications are in biological plants, the paper industry, food companies, sugar refineries, etc.
Chemical-physical characteristics
Parametro | Valore |
|---|---|
Appearance | Yellow liquid |
pH | 6 - 8 |
Solubility in Water | Insoluble |
Use and Applications
The product can be added to the water to be treated, as is or pre-dispersed. The dosage varies depending on the type of treatment required.
The average dosage ranges from 2 to 30 ppm depending on the severity of the phenomena.
The best addition system involves continuous feeding via a dosing pump in an area with good agitation and mixing with the flow to be treated.
Mixing is sufficient to re-homogenize any mass that may have separated.
Applicazione | Concentrazione |
|---|---|
Storage
The product is stable at temperatures between -5 and +35 °C. Any sedimentation or stratification phenomena do not affect the product's effectiveness.
Key Features
Non-silicone.
Applications
Industrial water treatment
Wastewater treatment plants
Paint booths
Textile sector
Tanning sector
Degreasing baths
Are you interested?
Write to us and we will reply as soon as possible!
