Technical specifications
Slightly alkaline liquid degreaser formulated for the pre-treatment of metals and aluminium in particular in pre-painting cycles.
In order to give the product greater cleaning power against oily contamination, it is advisable to use a detergent condensate that our Technical Service will be able to suggest depending on the cycle and operating conditions (e.g. our FIPROPLUS 701).
Usage and Applications
Can be used by spraying at a concentration of 10-20 g/lt or by dipping at a concentration of 30-50 g/lt.
Chemical-physical properties
Parametro | Valore |
|---|---|
Appearance | Clear yellowish liquid |
Smell | Characteristic |
Density | ~1,335 kg/lt |
PH | ~8.8 |
Bathroom control
Bath control is based on an acid-base titration according to the following methodology:
- Take 10 ml of liquor.
. - Add about 10 ml of distilled water and a few drops of methyl orange indicator.
- Titrate with 0.1 N hydrochloric acid (HCl 0.1 N) from yellow to a persistent red colour.
Let V1 be the volume in ml of acid used for titration. For a fresh bath prepared at a concentration of 20 g/l V1 = 5; this value is the initial bath score.
The number of ml of HCl N/10 consumed by the titration multiplied by 4 gives the concentration in g/l of the bath.
Applicazione | Concentrazione |
|---|
Power supply
For each missing point (V1) add approx. 4 kg on a 1000 litre tank.
Highlights
Multimaterial Degreasers
Pre- and Post-Processing Treatments
Environmentally friendly alternatives
Longevity and effectiveness
Regular checks
Formulated, produced and controlled in-house
Applications
Removal of whole and emulsifiable oils, fats and pastes
Defosphating
Polishing paste removal from parts and small parts
Removal of inter-operational, protective, polymeric films and silicones
Etinting treatments, pre-painting, pre-conversion
Plastic and glass cleaning
Interoperational or final product cleaning
