Technical specifications
FIPRO SG 575 is an alkaline liquid formulated with modern detergents for spray degreasing in washing machines and washing tunnels or can be used by immersion.
This product possesses high washing properties against emulsifiable and whole oils even at low concentrations and has excellent rinsing properties. This makes it suitable for use in prephosphating, where a very high degree of cleanliness is required, as well as the complete absence of alkaline detergent residues in the subsequent phosphating phase.
Thanks to special additives, it is characterised by good anti-oxidising properties.
FIPRO SG 575 is used on ferrous material and stainless steel. Depending on temperature, concentration and contact time and the type of alloy, FIPRO SG 575 can be used, subject to compatibility testing.
Usage and Applications
The product is used in spray washing machines at a concentration of 30-80 g/l at a temperature varying from 50 to 60° C depending on the material treated and the contaminant to be removed. Under the same operating conditions it can also be used in immersion systems. In the case of application on zamak, copper and magnesium it is recommended to operate at temperatures not exceeding 60° C.
.Preparation of new baths or periodic additions should be done by pouring the product slowly and agitating the bath, avoiding caustic splashes. Do not make massive and rapid additions of product.
Parametro | Valore |
|---|
Bathroom control
The bath is titrated by determining the alkalinity with bromocresol green indicator and HCl N/10 titrating solution as follows: take 5 ml of bath by graduated pipette, add 3-5 drops of bromocresol green and titrate with HCl N/10 until the solution turns from blue to yellow.The number of ml of HCl N/10 consumed by the titration multiplied by 4 gives the concentration in g/l of the bath. For each missing point and for every 1000 l of bath add 4 kg of FIPRO SG 575.
Applicazione | Concentrazione |
|---|
Highlights
Multimaterial Degreasers
Pre- and Post-Processing Treatments
Environmentally friendly alternatives
Longevity and effectiveness
Regular checks
Formulated, produced and controlled in-house
Applications
Removal of whole and emulsifiable oils, fats and pastes
Removal of inter-operational, protective, polymeric films and silicones
Etinting treatments, pre-painting, pre-conversion
Plastic and glass cleaning
Interoperational or final product cleaning
