top of page

PHOSPHO-DEGREASER - FIPROPHOS 530

Products for surface conversion and pre-painting.

Technical specifications

FIPROPHOS 530 is a phospho-degreaser, designed to provide the treated workpiece with an iron phosphate conversion coating with coating weights between 0.4 and 1,3 g/m2.

FIPROPHOS 530 consists of phosphates, surfactants, coating regulators, oxidation inhibitors, and line-stop inhibitors.

Use and Applications

PREPARATION OF A FIPROPHOS 530 BATH

  • Fill the tank with clean water

  • Turn on the system and the heating. Once the temperature of 40°C is reached, proceed to step 3

  • Add the amount of product required to reach the target concentration

  • Run the system for at least 5 - 10' to allow the bath to homogenize

  • ALCAFIP 250 for the adjustment of pH

Parametro
Valore

Bath control

Take 10 ml of the bath to be analyzed. Pour into a flask and add 50 ml of demineralized water. Add 4-8 drops of phenolphthalein solution.

Using a graduated pipette, titrate with 0.1N sodium hydroxide until a pink color appears.

The ml consumed indicate the bath points.

Points    Concentration
      3.3                        1%
      6.6                       2%
      9.9                       3%
     13.2                       4%
     16.5                       5%

These values are to be considered at bath make-up.

Therefore, it is recommended to determine the titer before adjusting the pH.

Then, once the bath has been adjusted to the correct working pH, proceed with a second determination of the points. The ml consumed will be the reference value to be maintained.

Applicazione
Concentrazione

Power supply

For every 1 point of missing total acidity, add 3.1 kg of FIPROPHOS 530 per 1000 liters of bath.

Storage

FIPROPHOS 530 is an acidic product, therefore avoid contact with eyes and skin.

It is recommended to handle the product using safety goggles, rubber gloves, and protective clothing. For further information, refer to the relevant safety data sheet.

Avoid impacts and improper handling of packaging which may cause product spillage. Protect from frost, store away from heat sources, and keep containers tightly closed in areas protected from moisture and direct sunlight.

Are you interested?

Write to us and we will reply as soon as possible!

PRIVACY Ideclare that I am sixteen years of age, and if under sixteen, that I have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in thePrivacy Policy.

COMMUNICATIONS I consent to the processing of my personal data. For sending the newsletter, communications by phone (SMS, WhatsApp, voice call)

Related Products

FIPROPHOS 538

Light-coat phosphating degreaser for ferrous materials, applicable by spray or immersion at low temperatures (starting from 30°).

FIPROPHOS 546

Lightweight multi-metal phosphodegreaser. Etching effect for galvanized aluminum.

FIPROPHOS 540

Lightweight multi-metal phospho-degreaser for hot spray application.

FIPROPHOS 545

Light-weight phospho-degreaser for ferrous materials, for spray application at medium-low temperatures (starting from 30°C)

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have a significant production capacity.
Fusti di stoccaggio
FREZZE 4-mod.jpg

TAILOR-MADE PRODUCTS

Fiprokim utilizes a research and development laboratory staffed by technicians specialized in the various sectors.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has over twenty years of experience in the field of research, formulation, production, and marketing of chemical products for metal treatment  and cleaning, and of coolants and lubricants for metal machining.

immagine azienda ridimensionata.jpg
bottom of page