top of page

FIPROPHOS 530

PRODUCTS FOR SURFACE CONVERSION AND PRE-PAINTING

Technical features

FIPROPHOS 530 is a phosphodegreaser, designed to give the treated article a conversion to iron phosphates with coating weights between 0.4 and 1.3 g / m2.
FIPROPHOS 530 consists of phosphates, surfactants, coating regulators, oxidation inhibitors and line stoppage inhibitors.

Usage and Applications

Bathe preparation:


  • Fill the tub with clean water

  • Activate the system and the heating. Once the temperature of 40 ° C has been reached, proceed with point 3

  • Add the quantity of product necessary to reach the programmed concentration

  • Start the system for at least 5 - 10 'to allow the bath to homogenize

  • ALCAFIP 250 for pH adjustment

Parametro
Valore

Control of bathing

Take 10 ml of bath to be analyzed. Place them in an Erlenmeyer flask and add 50 ml of demineralized water. Add 4-8 drops of phenolphthalein solution.
With a graduated pipette, titrate with 0.1N sodium hydroxide until a pink color appears.
The ml consumed indicates the bath score.


     Score                 Concentration
      3,3                                1%
      6,6                               2%
      9,9                               3%
     13,2                              4%
     16,5                              5%


These values ​​are to be considered when forming the bathroom.
Therefore it is advisable to determine the titer before adjusting the pH.
Then, once the bath has been adjusted to the correct working pH, proceed to a second determination of the score. The ml consumed will be the reference value to be maintained.

Applicazione
Concentrazione

Alimentation

For every 1 missing point of total acidity add kg. 3.1 of FIPROPHOS 530 every 1000 liters of bath.

Storage

  • Deposition of a homogeneous protective substrate

  • Easy to start and run process

  • Low environmental impact and non-hazardous products

  • Increased hours of salt spray

  • Increased adhesion of paints and coatings

  • Preconversion or final treatment

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPHOS 538

Light layer multimetal phosphogenic agent, with nitric, chlorates and molybdates. Applicable by spray, immersion or pressure lance.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page