top of page

METALFIP 328

Products designed for the removal of surface oxide layers and contaminants.

Technical specifications

METALFIP 328 is a product that allows for the simultaneous deoxidizing and phosphating of ferrous materials. It forms
a coating consisting essentially of iron phosphates, particularly suitable for preparing the material for painting.
METALFIP 328 contains antioxidants, and is therefore recommended for prepainting lines with low chain speeds or for plants where frequent production stops are possible.
METALFIP 328 can also perform an effective degreasing action when used in combination with a suitable surfactant. It can also be used on non-ferrous surfaces, on which, however, it only exerts a deoxidizing action and, if appropriately additived, also a degreasing action.

Physico-Chemical Data

Parametro
Valore
Appearance
Clear yellowish liquid
Density at 20 °C
1.421 g/cm3
pH
~2

Use and Applications

METALFIP 328 must be used in aqueous solution, under the following operating conditions:

Bath temperature:

  • SPRAY 50 – 70 ° C

  • IMMERSION 50 – 70 ° C

Treatment time:

  • SPRAY 2’ - 5

  • IMMERSION 5’ - 10’

BATH PREPARATION

SPRAY

  • 20 - 60 g/l

  • Points 11.3 – 33,9 ml

IMMERSION

  • 30 - 100 g/l

  • Points 17.0 – 56,5 ml​

Applicazione
Concentrazione

Solution control

  • Take 10 ml of the bath with a volumetric pipette,

  • Pour into an Erlenmeyer flask, dilute with distilled water, add 3 - 5 drops of methyl orange indicator

  • Titrate with 0.1 N NaOH until the color changes from red to persistent yellow.

The ml of 0.1 N NaOH consumed for the color change give the bath points.

A bath prepared at 60 g/l has a points value of approximately 33,9 ml.

Power supply

Replenish with METALFIP 328 in rate of 1,76 kg (equal to 1.25 liters) for each missing point and per 1000 liters of bath.

Precautions

Materials coming into contact with METALFIP 328 must be acid-resistant – AISI 316 L.

For transport, storage, handling, and the discharge of effluents, follow the instructions and current regulations.
Avoid improper handling of packaging which may cause product spillage.
Protect from frost, store away from heat sources and direct sunlight, keep containers tightly closed.

Are you interested?

Write to us and we will reply as soon as possible!

PRIVACY Ideclare that I am sixteen years of age, and if under sixteen, that I have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in thePrivacy Policy.

COMMUNICATIONS I consent to the processing of my personal data. For sending the newsletter, communications by phone (SMS, WhatsApp, voice call)

Related Products

METALFIP 323

Brightener for die-cast aluminum, also suitable for vibratory finishing, slightly foaming.

METALFIP 325

Strong acid-based product with wetting agents. Deoxidizing degreaser for aluminum and galvanized steel. Ideal for pre-painting and pre-conversion.

METALFIP 329

Uninhibited mixture of strong acids and surfactants. It provides a pickling, etching, and degreasing action for aluminum, ideal for prepainting and pre-conversion.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have a significant production capacity.
Fusti di stoccaggio
FREZZE 4-mod.jpg

TAILOR-MADE PRODUCTS

Fiprokim utilizes a research and development laboratory staffed by technicians specialized in the various sectors.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has over twenty years of experience in the field of research, formulation, production, and marketing of chemical products for metal treatment  and cleaning, and of coolants and lubricants for metal machining.

immagine azienda ridimensionata.jpg
bottom of page