Technical specifications
FIPROFLUX 361 has been formulated to protect materials such as monel and nickel silver from thermal oxidation. It is used in brazing up to a temperature of 800 °C.
FIPROFLUX 361 also allows brazing without the use of deoxidizing powders or pastes, as it deoxidizes and promotes the flow of the filler alloy.
An area of use is, for example, brazing in eyewear manufacturing, brazing of silver costume jewelry, and tinning on copper or stainless steel.
FIPROFLUX 361 is a solvent-based, low-hazard, non-toxic formulation.
Use and Applications
Treat both parts to be joined, which must be perfectly degreased and dry.
Wet by immersion.
Imperfect degreasing is visible on shiny parts because the borate film appears patchy; to eliminate the problem, simply immerse the parts again and keep them soaked for a few minutes.
After immersion, allow to dry for a few minutes; a heat source can be used to reduce drying times.
Note: the white borate film that has formed is resistant to dry contact and degrades immediately upon wet contact.
Caution: proceed with welding without interruption, applying the filler metal only when the metal has reached the required temperature.
By following these guidelines, the joint between the two parts is perfect and there is no need to use other flux powders or pastes.
Parametro | Valore |
|---|---|
Storage
Attention: refer to the safety data sheet. The product is highly flammable.
Avoid contact with skin and inhalation of the product. Wear protective clothing and use respiratory protection. Keep away from heat, flames and sparks.
Store in a tightly closed container, in a well-ventilated, cool and dry place.
Applicazione | Concentrazione |
|---|---|
Key Features
Specific for copper-nickel or copper-zinc-nickel alloys.
Applications
Copper alloys (monel) sector, but also silver
Eyewear sector
Are you interested?
Write to us and we will reply as soon as possible!
