Technical features
FIPROPHOS 510 is a liquid phospho-degreaser suitable for the pre-painting treatment of ferrous material, aluminum and zinc.
The surfactants contained in the product are non-foaming in nature. This allows the product to wash even at room temperature without creating problems of excessive foaming.
The FIPROPHOS 510 product effectively removes machining and molding oils and other greasy contaminants from metal surfaces, giving the treated surface a phosphate conversion weighing 0.3-0.6 g / m2.
Thanks to its formulation, it can be used where an energetic deoxidizing action combined with a phosphating action is required.
To increase the degreasing power and the duration of the solutions it is possible to add specific additives, such as for example. our FIPROPLUS 701 degreasing additive.
Physical-Chemical Data
Parametro | Valore |
---|---|
Appearance | Amber liquid |
pH | 3 - 4 |
Specific Weight | ~1.170 Kg/l |
Usage and Applications
PREPARATION OF A BATH
Fill the tub with clean water
Activate the system and the heating
Add the quantity of product necessary to reach the desired concentration (possibly in the suction area of the pumps).
Run the system for 5-10 'to allow the bath to homogenize
Applicazione | Concentrazione |
---|
Control of bathing
Take 10 ml of the bath to be analyzed and place them in the flask
Add 5-6 drops of phenolphthalein indicator.
Add 100ml of distilled water
Titrate with sodium hydroxide N / 10 until a persistent pink color of the solution is obtained.
The ml of Sodium Hydrate N / 10 consumed in the titration indicate the total acidity of the FIPROPHOS 510 bath.
Alimentation
Deposition of a homogeneous protective substrate
Easy to start and run process
Low environmental impact and non-hazardous products
Increased hours of salt spray
Increased adhesion of paints and coatings
Preconversion or final treatment
Warnings
FIPROPHOS 510 is an acidic product, therefore avoid contact with eyes and skin.
It is recommended to handle the product with rubber gloves and protective clothing.