Technical specifications
FIPROSTEEL 754 is a pickling gel for 300 series stainless steel for use with a spray pump.
It allows for the pickling of both the weld seams only and the entire surface without leaving unsightly marks. It does not cause application issues, even in direct sunlight, provided care is taken not to apply it to scorching hot surfaces.
If necessary, the surfaces must first be cooled by spraying water before applying the gel.
Physico-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Pale yellow gelatinous paste |
Odor | Pungent |
pH | <1 |
Solubility in Water | Complete |
Use
FIPROSTEEL 754 should be used as is with the sprayer. Wait for the necessary time which, depending on the type of steel, thickness, and type of weld, can vary from a few minutes to several hours. If necessary, before washing, brush the weld with a stainless steel brush. Wash with cold water, preferably with a high-pressure jet (pressure washer).
Not strictly necessary, but to achieve a better result, follow the first cold wash with a hot wash.
Applicazione | Concentrazione |
|---|---|
Warnings
Standard precautions for using an acidic product are recommended. If working inside a tank, it is essential to wear a gas mask and, if necessary, use forced ventilation.
Key Features
Pickling gel
Allows pickling of difficult areas
Treatment of 300 series steel
Suitable for welds
Applications
Stainless steel degreasing and cleaning
Pre-pickling treatment
Stainless steel brightening
Sei interessato?
Scrivici e ti risponderemo nel più breve tempo possibile!
