Technical characteristics
FIPROSTEEL 753 comes in the form of a homogeneous paste, capable of chemically creating a chromium oxide layer on the surface of stainless steel. In this sense, it is an accelerator of the passivation reaction that occurs through the natural exposure of stainless steel products to air. Its use is generally as a final treatment, as it does not alter the visual appearance of the products in the slightest.
Physico-Chemical Data
Parametro | Valore |
|---|---|
Appearance | White paste |
Odor | Pungent |
pH | <1 |
Use
FIPROSTEEL 753 should be used as is, after mixing.
It is therefore recommended to homogenize the product by mixing it before spreading a layer of paste that is not too thin.
For full effect, it is suggested to wait 1 to 2 hours, depending on the ambient temperature: in cold environments, more than 2 hours may be required.
This operation must not be carried out at an ambient temperature below 5 °C.
Once the necessary time has elapsed, rinse thoroughly and copiously.
Applicazione | Concentrazione |
|---|---|
Highlights
Passivating gel
Allows for the treatment of difficult areas
Suitable for any stainless steel series
Fluorine-free
Applications
Stainless steel passivation
Post-pickling treatment
Storage of stainless steel products
Are you interested?
Write to us and we will reply as soon as possible!
