top of page

WATERFIP 877

COAGULANTS AND FLOCCULANTS, DESCALANTS, BACTERICIDES

Technical features

WATERFIP 877 is a paste product, developed for the coagulation of paints in water film spray booths. It is suitable for the treatment of water-based and solvent-based paints, even those that are difficult to denature (polyesters, alkyls, acrylics, melamines, high-dry, U.V. hardeners)
WATERFIP 877 offers countless advantages: it has no hazard labeling, it keeps the recirculating water clear and odorless and forms non-sticky or adherent sludge that can be easily and quickly removed from the systems.

Usage and Applications

WATERFIP 877 is used as it is, at an initial concentration of 0.5 - 2.5 kg of product per cubic meter of water to be treated.
Subsequent additions are made according to the paint overspray, normally in the ratio of 3% - 50% of product on the quantity of sprayed paint, using automatic dosing systems.
The correct dosage of WATERFIP 877 is determined during the start-up phase of the system.
In the case of manual dosage, to ensure a good consistency in the denaturation of the paints, the product additions must be carried out at short and regular intervals.
The dosage should in any case be carried out in an area of ​​high turbulence (eg near the recirculation pump) because thanks to this arrangement there will be good mixing and a marked improvement in coagulation and flotation.

Parametro
Valore

Storage

Avoid knocks and improper handling of the packaging which can cause the product to leak. Protect from freezing, store away from heat sources, keep containers tightly closed.

Applicazione
Concentrazione

Highlights

  • Denaturation and intertization of paints

  • Sedimentation or flotation of sludge

  • Cabin water treatment

  • Powder product, suitable for augers

  • Self-flocculating

  • It does not require a pH corrector

  • Suitable for any water hardness

  • Paint denaturation in water veil booths

  • Process water clarification

  • Removal of dispersed solids by flocculation

  • Abatement of substances (also dissolved)

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

WATERFIP 870

Cationic polyelectrolyte, excellent for painting in combination with coagulants, promotes flotation, free from chlorides.

WATERFIP 873

Powder product based on inorganic salts, bentonites and flocculants, with activated carbon, promotes sedimentation.

WATERFIP 879

Denaturing product based on inorganic salts and polymers, particularly suitable for water-based paints in spray painting systems.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page