Technical specifications
FIPROPLUS 933 is a liquid alkaline detergent designed for degreasing ferrous material in industry in general, with simultaneous rust protection. It is a nitrite- and mineral oil-free formulation.
High detergent properties even at very low concentrations. Suitable for removing machining oils, workshop dirt from all kinds of metal surfaces.
Thanks to its formulation, it does not leave salt deposits on treated parts, does not cause scaling and sludge.
Usage and Applications
FIPROPLUS 933 is easily soluble and does not foam in hard water. Its solutions are stable over wide concentration ranges and even under extreme conditions of use (high temperatures, high pressures and high water hardness). Ideal as an inter-operational degreaser.
WORKING CONDITIONS
Working temperature: da ambiente a 60 °C
Bath formation product concentration: 10 - 30 g/l
Treatment time: da 3 a 10 minuti
Parametro | Valore |
---|
Applicazione | Concentrazione |
---|
Bathroom control
Take 10 ml of bath, add a few drops of bromocresol green and titrate with 0.1 N HCl (hydrochloric acid) until blue to yellow.
g/l concentration of FIPROPLUS 933 = ml acid 0.1 N x 2.05.
Power supply
Maintain the concentration value established at plant start-up by the Fiprokim technical service.
Storage
For transport, storage, handling follow current legislation. For further information on the product, please refer to the relevant Safety Data Sheet. Avoid shocks, improper handling of packages which may cause product spillage. Protect from frost, store away from heat sources, keep containers tightly closed.
Highlights
Alkaline liquid detergent
. High detergent properties
. Oil removal on metal surfaces