Description
LUBROFIP 4013 is a boron- and formaldehyde-free biostatic emulsifiable metalworking fluid suitable for even very heavy-duty machining and grinding of ferrous, non-ferrous metals and yellow alloys.
Features and benefits
Formulation
Thanks to its special formulation, LUBROFIP 4013 forms a translucent and stable microemulsion in water, capable of guaranteeing excellent performance even in the long term
LUBROFIP 4013 is free of boron and formaldehyde
LUBROFIP 4013 is characterized by high EP (Extreme Pressure) properties and excellent protection against oxidation.
The emulsifying package has been formulated to provide good emulsifying capabilities with both hard and soft water.
Advantages
The long life of the emulsion allows for cost savings
The translucent emulsion offers good washing capabilities that ensure good cleanliness of the machined parts and the machine.
Excellent biocidal capabilities reduce the occurrence of bad odors caused by bacteria, fungi, and algae.
Suitable for both individual and centralized systems
Reduced environmental and operator impact
Versatile product, also suitable for very heavy-duty metal removal operations, such as tapping and broaching.
Also suitable for machining yellow alloys
Excellent anti-oxidation properties
Possibility of using the product with water of different hardnesses.
Excellent anti-foaming properties
Physico-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Amber liquid |
Density | 0.95 Kg/l |
Refractometer factor | 1 |
Emulsion Type | Translucent Microemulsion |
pH at 3% | 8.8 - 9.3 |
Applications and Use Concentration
LUBROFIP 4013 is suitable for chip removal machining, even heavy-duty, and for grinding of ferrous, non-ferrous metals and yellow alloys.
Operating concentrations vary depending on the severity of the machining operation and the material being machined
The indicative usage percentages are:
Applicazione | Concentrazione |
|---|---|
General cutting operations | 4 - 8 % |
Grinding | 3 - 4% |
Single- and multi-spindle automatic turning | 4 - 8 % |
Cast iron machining | 4 - 8% |
Very heavy-duty operations | 6 - 12% |
Methods of use and storage
Before the first filling with LUBROFIP 4013, add the specific detergent FIPRO SG 1015 recommended by the technical service and continue working for at least 16 hours.
Empty the system, rinse, and fill with fresh emulsion.
The emulsion can be prepared either manually or with an automatic mixer, by adding the pure product to water. Never vice versa. It is good practice to shake the product before use.
In order for LUBROFIP 4013 emulsions to retain their biostatic and antioxidant properties, it is essential not to fall below the minimum recommended concentration.
If necessary, auxiliary products recommended by the technical service can be used.
Keep the emulsion tank clean. If slideway oil is present on the surface, use an oil skimmer to allow aeration of the emulsion.
Do not store the product for more than six months. Protect from frost; keep packaging closed and away from heat sources. Avoid storage in direct sunlight (storage temperatures between +5°C and +40°C).
The Fiprokim technical service is available for consultation and on-site support at your company.
Key Features
Mineral-based multi-metal emulsifiable coolant for metalworking
Semi-synthetic
Free from formaldehyde donors and chlorine
Applications
Grinding and machining operations, including heavy-duty:
cutting
turning
milling
single and multi-spindle CNC machines
roughing
reaming
boring
drilling
threading
Are you interested?
Write to us and we will reply as soon as possible!
