Description
LUBROFIP 4804 is a nitrite-, chlorine-, boron- and formaldehyde-free soluble synthetic cooling lubricant. Appropriately additivated with Extreme Pressure additives, it is suitable for grinding, cutting and chip removal of ferrous, non-ferrous metals and yellow alloys containing cobalt.
Features and benefits
Formulation
Thanks to its special formulation, LUBROFIP 4804 forms a clear and stable solution in water.
LUBROFIP 4804 is free of mineral oil, nitrite, sulphur, boron, chlorine and formaldehyde.
LUBROFIP 4804 contains EP (extreme pressure) additives
Advantages
Long solution life
. Clear solution offers considerable washing capabilities and allows for greater grinding wheel cleanliness.
In cutting operations it enables greater cleanliness of the workpieces and the machine.
The excellent biostatic capabilities reduce the occurrence of bad odours caused by bacteria, fungi and algae.
Suitable for both individual and centralised systems
. Reduced environmental impact and reduced danger for the operator
. Also suitable for chip removal operations.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Amber-yellow liquid |
Refractometric factor | 2.05 |
Paper Test 3% | Pass |
Type of Emulsion | Limpid |
3% PH | 8.7 - 9 |
Applications and Concentration of Use
LUBROFIP 4804 is suitable for grinding ferrous, non-ferrous metals and yellow alloys. Also suitable for use with materials containing cobalt.
The concentrations of use vary depending on the heaviness of the work and the material being processed.
Applicazione | Concentrazione |
|---|
Methods of use and storage
Before filling with LUBROFIP 4804 for the first time, add the appropriate cleaner FIPRO SG 1015recommended by the technical service and continue to work for at least 16 hours.
Empty the system, rinse and refill with fresh emulsion.
The emulsion can be prepared either manually or with an automatic mixer, adding the pure product to the water. Never vice versa. It is good practice to shake the product before use.
For LUBROFIP 4804 emulsions to retain their biostatic and antioxidant properties, it is essential not to go below the recommended minimum concentration.
If necessary, auxiliary products recommended by the technical service can be used.
Keep the emulsion tank clean. If there is guide oil on the surface, use an oil skimmer to allow the emulsion to aerate.
Do not store the product for more than six months. Protect against frost, keep packaging closed and away from heat sources. Avoid storage in direct sunlight (storage temperatures between +5°C and +40°C).
Fiprokim technical service is available for advice and presence at your company.
Highlights
Soluble cooling lubricants for grinding and metalworking
. Safe for the operator
Multimetal and specific products
Applications
Useable for grinding and cutting operations on all metals
. Turning, milling, grinding, cutting
Cnc machines, grinding, single and multi-spindle machines, lathes, milling machines
