top of page

ULTRAFIP 607

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

ULTRAFIP 607 degreaser is a product suitable for all metals. It is particularly suitable for the removal of polishing and lapping pastes, emulsifiable and whole oils, with the aid of ultrasound. ULTRAFIP 607 works in a practically neutral environment, therefore it is suitable for aluminum, brass and zamak.
The product avoids the too alkaline conditions typical of many degreasing processes. The absence of caustic soda eliminates the risks for the operators, just as the lack of ligninsulfonates avoids problems when purifying the drains. Foaming agent.
The product can be used as a highly degreasing additive for alkaline baths.

Usage and Applications

Concentration of use 3 - 10%
Working temperature 50 - 60 ° C
Roto, immersion, ultrasound systems.
Tank materials and equipment can be in carbon steel.

Parametro
Valore

Control of bathing

The bath is titrated by determining the total alkalinity with verdebromocresol indicator (VBC) and 0.1 N hydrochloric or sulfuric acid titrating solution by operating as follows:
- take 10 ml of bath using a graduated pipette, add 4-5 drops of VBC indicator, 50 ml of demineralized water and titrate with 0.1 N acid until the solution changes from blue to yellow.
The number of ml of 0.1 N acid consumed in the titration multiplied by 6.9 gives the concentration in g / l of the bath.

ATTENTION: this determination is valid for an initial bath prepared with low hardness water. The factors affecting the score are:
a) Water alkalinity due to hardness and other salts. It should be predetermined, case by case, and subtracted from the consumption of the analysis.
b) Alkalinity from pastes and oils (in particular emulsifiable ones).

Applicazione
Concentrazione

Storage

For the transport, storage, handling and discharge of wastewater, follow the indications and laws in force. For further information on the product consult the Safety Data Sheet.
Store the product in its original sealed packaging in a cool place away from frost and direct sunlight.

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

ULTRAFIP 601

Strongly alkaline soda-based product, with sequestering, dedusting, dispersing and anti-scaling agents. usable as a degreaser and as a dephosphating agent.

ULTRAFIP 605

Based on organic acids, with additives with surfactants. Suitable for removing oils and tumbling and polishing pastes used in eyewear and cutlery. For stainless steel, aluminum, plastic, brass, copper, galvanized material (after testing). On brass and copper it exerts a deoxidizing and brightening action.

ULTRAFIP 602

Caustic alkaline liquid product formulated for the degreasing of stainless steel and ferrous materials. Indicated for the removal of oils, greasy substances and carbon residues.

ULTRAFIP 610

Alkaline product, based on soaps, surfactants, sequestrants, alcohol and amines, free of mineral salts. Suitable for the removal of oils, greases, polishing pastes, tumbling, lapping, from stainless steel, aluminum, plastic. On brass and copper it also exerts a deoxidizing and whitening action. The surface remains hydrophobic.

ULTRAFIP 604

Soda-based highly caustic liquid degreaser, with sequestering, dedusting, dispersing and anti-scaling agents. Similar to Ultrafip 601, it can be used as a degreaser and as a de-phosphating agent.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page