Technical specifications
ULTRAFIP 610 is a liquid degreaser specifically for the removal of cleaning pastes from copper and brass, ferrous materials and aluminium.
ULTRAFIP 610 is used in electroplating, taps and fittings, eyewear and wherever cleaning pastes need to be removed from metal parts.
Like all soap-based products, ULTRAFIP 610 leaves a hydrophobic film on the parts, which imparts a slight passivation. This layer is easily removed by normal alkaline degreasing.
Usage and Applications
Ultrafip 610 is used in immersion baths, possibly with ultrasound.
Good degreasing results can already be achieved at temperatures close to 60 °C, but for complete removal of polishing pastes a temperature between 75 and 90 °C is recommended. The tanks should be prepared at a concentration between 2 and 6% depending on the degree of surface pollution.
Parametro | Valore |
|---|
Bathroom control
Take 10 ml of the bath and place it in an Erlenmeyer flask or beaker. Add 50 ml of demineralised water and 5-6 drops of phenolphthalein. The solution will turn violet. Titrate with a graduated pipette and 0.1N acid until the violet colour disappears. The ml of acid consumed represents the bath score.
A 3% bath score is 4.2 points.
Applicazione | Concentrazione |
|---|
Storage
The product ULTRAFIP 610 must be stored in its original packaging in a ventilated and dry place, protect from frost, store away from heat sources.
Avoid shocks and improper handling of the packaging, which can lead to product spillage.
