Technical characteristics
FIPRO SG 580 is an alkaline inter-operational degreaser used for the washing and simultaneous anti-corrosion protection of the processed material. Designed for the removal of machining oils from ferrous surfaces or aluminum alloys in spray treatment systems. FIPRO SG 580 is a synthetic formulation free of mineral oils.
The level of protection provided by FIPRO SG 580, if not rinsed, is compatible with the storage of the treated materials in covered warehouses and can be evaluated according to UNI 9374 and 9375 standards.
Use and Applications
The product can be used as a protective inter-operational degreaser in single-stage systems or as a rust inhibitor in final rinses before the drying stage. The main use of FIPRO SG 580 is in spray treatment systems or where there is the possibility of combining mechanical action with a controlled-foam washing solution.
Concentration of FIPRO SG 580: 2 – 6 %
Solution temperature: 30 – 70 °C
If used as a rust inhibitor in final rinses, concentrations between 1 and 2%.
Parametro | Valore |
|---|---|
Bath control
Concentration control is performed by titration of the total alkalinity present in the solution, using the following method:
Take 10 ml of washing solution and transfer to a flask
Add approximately 6-8 drops of bromocresol green indicator
Titrate with 0.1 N Hydrochloric acid until the color changes from blue to yellow
The ml of 0.1 N Hydrochloric acid used represent the total alkalinity value.
To obtain the concentration in g/l, multiply the value obtained by the fixed factor "4.65", within the usual working concentration ranges (i.e., for values between 20 and 50 g/l).
The frequency of checks must be established based on the specific application. In the absence of special conditions, a daily determination of the concentration is recommended, which is sufficient to establish the trend of product consumption.
Applicazione | Concentrazione |
|---|---|
Storage
For the handling and storage of the product, it is recommended to comply with the instructions in the relevant
safety data sheet. If possible, use covered warehouses, avoiding exposing the product to heat sources or
temperatures below 5 °C.
Key Features
Multi-material degreasers
Pre- and post-machining treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, manufactured, and tested in-house
Applications
Removal of neat and emulsifiable oils, greases, and processing pastes
Dephosphating
Removal of polishing pastes from components and small parts
Removal of inter-operational residues, protective coatings, polymeric films and silicones
Etching, pre-painting, and pre-conversion treatments
Cleaning of plastics and glass
Inter-operational or final cleaning of the product
Are you interested?
Write to us and we will reply as soon as possible!
