top of page

FIPRO SG 596

PRODUCTS FOR THE REMOVAL OF ORGANIC AND INORGANIC CONTAMINANTS FROM MULTIMETAL SURFACES

Technical features

FIPRO SG 596 is a high efficiency casutic alkaline degreaser for pre-treatment cycles on ferrous materials.
It can be used by immersion or spray on steel and stainless steel. Not to be used on galvanized, aluminum and its alloys.
Given its particular formulation, it is suitable for removing calcium stearate and can be used as a dephosphating agent.

Usage and Applications

FIPRO SG 596 is used in aqueous solution, by spray or by immersion.
Operating conditions vary depending on how they are used, as described below.

Physical-Chemical Data

Parametro
Valore
Appearance
Straw yellow liquid
Density
~1.4 Kg/l
pH
~12.5

Control of bathing

Take 10 ml of bath, pour them into a conical flask, add about 50 ml of demineralized water and 3 ÷ 5 drops of phenolphthalein indicator, titrate with 0.1 N sulfuric acid until the color changes from pink to colorless. The ml of acid consumed for toning represent the degreaser score which for a bath prepared at 20 g / l is equal to 11.4 points. For a bath prepared at 80 g / l, the score is 45.6 points.

Applicazione
Concentrazione

Alimentation

The bath must be maintained at the score set at the time of system start-up by adding FIPRO SG 596 at a rate of 1.75 kg for each missing point and for each 1000 liters of solution. The Fiprokim Technical Service, upon start-up, will recommend the best additive to use according to the type of material to be treated, the methods of use and the type of system.

Storage

All the parts in contact with FIPRO SG 596 can be built with chromium nickel steel, AISI 321 or chromium nickel molybdenum, AISI 316Ti. For the transport, storage, handling and discharge of wastewater, follow the indications and laws in force. For further information on the product consult the Safety Data Sheet. Store the product in its original sealed packaging in a cool place away from frost and direct sunlight.

Highlights

  • Multi-material degreasers

  • Pre and Post processing treatments

  • Low environmental impact alternatives

  • Longevity and effectiveness

  • Periodic checks

  • Formulated, produced and controlled internally

Application

  • Removal of whole and emulsifiable oils, fats and processing pastes

  • Dephosphating

  • Removal of polishing pastes from parts and small parts

  • Removal of interoperational, protective, polymer films and silicones

  • Etching, pre-painting, pre-conversion treatments

  • Cleaning of plastics and glass

  • Interoperational or final cleaning of the product

Are you interested?

Write to us and we'll get back to you as soon as possible!

Privacy

I hereby declare that I am sixteen years of age or older, and if under sixteen, that I have been authorised by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

Communications

I consent to the processing of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

Related Products

FIPRO SG 590

Alkaline multimetal degreaser, free of soda and potash. suitable for the removal of emulsifiable and whole oils, usable at low temperatures. If left on iron, it can be stored for 1 month. Easily rinsed.

FIPRO SG 598

Potash alkaline degreaser, anticrustants and phosphates. Suitable for both phosphate and nanotechnological preconversion processes.

FIPRO SG 592

Formulated with phosphoric acid and surfactants. Indicated for the removal of oil and pastes. It has a deoxidizing effect on yellow alloys, while it gives a light etching effect on the galvanized.

FIPRO SG 593

Alkaline degreaser based on potash and phosphates. It can be used with products from the Fiproplus line and is used for the removal of whole and emulsifiable oil. Suitable for pre-phosphating treatments.

A LITTLE ABOUT US

OUR PRODUCTION

All Fiprokim lines are produced at our facility in Altavilla Vicentina.
The wide range of mixers and equipment allows us to have considerable production power.
Fusti di stoccaggio
FREZZE 4-mod.jpg

Customised products

Fiprokim has a research and development laboratory staffed by technicians specialised in various fields.

The study of technical solutions, the selection and control of raw materials are part of the process of creating an effective product.

OUR COMPANY

Fiprokim has more than 20 years' experience in the research, formulation, production and marketing of chemical products for the treatment of metals  and their cleaning and of coolants for mechanical metalworking.

immagine azienda ridimensionata.jpg
bottom of page