Technical features
FIPRO AK 07 is a liquid formulation based on organic phosphonates and dispersants, miscible in any ratio with water. It prevents the formation of deposits by distortion of the crystal lattice (Threshold effect) and, if the stabilization limit is exceeded, it forms a non-encrusting amorphous precipitate. By means of its components it carries out an anticorrosive action and over time eliminates old deposits of oxides and encrustations. The product is effective up to a wall temperature of about 300 ° C. It can be used in a pH range from 7 to 10.
Physical-Chemical Data
Parametro | Valore |
---|
Usage and Applications
It has strong anti-limescale and dispersant characteristics for water circuits, with high total hardness, open and closed where, due to the high heat exchange, scale problems arise. FIPRO AK 07 is not volatile, it has no negative effect on the environment at the concentrations we recommend.
FIPRO AK 07 can be used as it is or pre-diluted with softened or demineralized water. The dosage can take place, especially if the make-up water is not constant, with an automatic system. The dosages are variable and depend on various factors, it is advisable to maintain a concentration of 30 to 200 g / m3 calculated in the circuit.
Applicazione | Concentrazione |
---|
Control of bathing
Use the specific Test-Kit.
Storage
Avoid knocks and improper handling of the packaging which can cause the product to leak. Protect from freezing (freezing point -7 ° C), store away from heat sources, keep containers tightly closed in places protected from humidity.
Application
Tube circuits, heat exchangers, evaporators, boilers
Water conditioning
Prevention of inorganic and organic encrustations and sediments in open and closed circuits
Prevention and arrest of corrosive phenomena localized in circuits and pipes
Salinity and hardness regulation
Elimination of bacterial flora and prevention,
Sanitation
Circuit cleaning and maintenance