Technical features
FIPRO SG 596 is a high efficiency casutic alkaline degreaser for pre-treatment cycles on ferrous materials.
It can be used by immersion or spray on steel and stainless steel. Not to be used on galvanized, aluminum and its alloys.
Given its particular formulation, it is suitable for removing calcium stearate and can be used as a dephosphating agent.
Usage and Applications
FIPRO SG 596 is used in aqueous solution, by spray or by immersion.
Operating conditions vary depending on how they are used, as described below.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Straw yellow liquid |
Density | ~1.4 Kg/l |
pH | ~12.5 |
Control of bathing
Take 10 ml of bath, pour them into a conical flask, add about 50 ml of demineralized water and 3 ÷ 5 drops of phenolphthalein indicator, titrate with 0.1 N sulfuric acid until the color changes from pink to colorless. The ml of acid consumed for toning represent the degreaser score which for a bath prepared at 20 g / l is equal to 11.4 points. For a bath prepared at 80 g / l, the score is 45.6 points.
Applicazione | Concentrazione |
|---|
Alimentation
The bath must be maintained at the score set at the time of system start-up by adding FIPRO SG 596 at a rate of 1.75 kg for each missing point and for each 1000 liters of solution. The Fiprokim Technical Service, upon start-up, will recommend the best additive to use according to the type of material to be treated, the methods of use and the type of system.
Storage
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Highlights
Multi-material degreasers
Pre and Post processing treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, produced and controlled internally
Application
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Prodotti Correlati
UN PO' DI NOI
