top of page

FIPROPHOS 509

PRODUCTS FOR SURFACE CONVERSION AND PRE-PAINTING

Technical features

FIPROPHOS 509 is a liquid phosphating agent for the pre-painting treatment of ferrous material.
FIPROPHOS 509 effectively removes processing, protective and molding oils from metal surfaces, simultaneously developing a phosphate coating of 3-8 mgr / dm2 ideal for anchoring paints. To increase the degreasing power and duration of the solutions, it is possible to add the degreasing additive FIPROPLUS 701.

Physical-Chemical Data

Parametro
Valore
Appearance
Yellow liquid
Smell
Bland
pH
3.5 - 5.5
Specific Weight
1.245 Kg/l
Rinseability
Good
Biodegradable
Yes
Phosphates
Present
Foam formation
Low
Behavior in hard water
Good

Usage and Applications

1st stage

  • FIPROPHOS 509 10 -30 g / lt, 35 - 60 ° C; pH 3.5 - 5.5

2nd stage

  • Rinse with cold running water.

3rd stage

  • Passivation with FIPROPLUS 704 conc. 0.3 - 0.6% and temp. environment.


In order to avoid oxidation problems, make sure that the pieces are then dried as soon as possible.
To increase the degreasing power, the additive FIPROPLUS 701 in a concentration of 0.1-0.4% can be added to the solution.

Applicazione
Concentrazione

Preparation of the solutions

Slowly pour the product into warm or hot water. The construction materials of the plant must be in stainless steel.

Control of bathing

  • Deposition of a homogeneous protective substrate

  • Easy to start and run process

  • Low environmental impact and non-hazardous products

  • Increased hours of salt spray

  • Increased adhesion of paints and coatings

  • Preconversion or final treatment

Application

To obtain the concentration in g / l, multiply the value obtained by the fixed number “3.3”.
Then bring the concentration to the required value, adding 3.3 Kg of product per 1000 Lt. of bath for each missing point.

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPHOS 505

Powder phosphating agent, designed for the treatment of ferrous material in spray systems. Suitable for degreasing zinc, aluminum and alloys.

FIPROPHOS 510

Light layer multimetal phosphodegreaser with antiscalants. Applicable by spray and hot.

FIPROPHOS 517

Light layer multimetal phosphodegreaser, with additive with anticorrosive, foaming agent. To be used with pressure washer lances.

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page